Convert-A-Ball Ball Mount with 10 Inch Drop Review - 2014 Ram 2500- Video
Today on our 2014 Ram 2500, we are going to be taking a look at the convert a ball cushion ball mount. It's a designed with a 10 inch drop or an eight and three quarters inch rise, part number on it is AMSC10. We've got a two and a half inch hitch here on our Ram now. We've got a reducer bushing that we are going to put in. This is going to convert our two and a half inch into the two inch that we need for our ball mount. We'll take our bushing, slide it here under the ball mount and then we are going to slide them both into our receiver tube hitch or the receiver tube over hitch rather. As we do it, we want to be sure we line up our pinholes. more
5/7/2014 6:09:45 AM
Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2014 Ram 2500- Video
Today on our 2014 RAM 2500, we'll be test fitting the convert-a-ball cushioned six-way multi-hitch ball for 2-inch hitches rated at 10,000 pounds, part number CAV-6W. Our vehicle is equipped with a 2-1/2 inch hitch so we'll be using the blue ox hitch reducer sleeve from a 2-1/2 inch to a 2-inch hitch, part number VX88187. With the reducer sleeve already installed, we'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll do so with the facing up. We'll need to line up the pinhole and the adapter sleeve and then slide the sleeve further back into the hitch. Once all the pinholes are lined up, we'll then insert a pin, secure with the clip in the other side. With the ball mount in this position, the 2-5/16 inch ball is on the top. You can rotate the ball mount to the left or to the right to access the 2-inch ball or the 1-7/8 inch ball. more
3/27/2014 5:16:28 AM
Filter Videos
Filter Videos
